Lenovo ThinkCentre A62 (English US/UK) User guide - Page 70
Selecting or changing the startup device sequence, Exiting from the Setup Utility program, Startup
View all Lenovo ThinkCentre A62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Selecting or changing the startup device sequence To view or permanently change the configured startup device sequence, do the following: 1. Start the Setup Utility program (see "Starting the Setup Utility program" on page 59). 2. Select Startup and read the information displayed on the right side of the screen. 3. Select the devices for the Primary Boot Sequence, the Automatic Boot Sequence, and the Error Boot Sequence. 4. From the Setup Utility menu, select Exit → Save Changes and Exit. If you have changed these settings and want to return to the default settings, select Load Optimal Defaults on the Exit menu. Exiting from the Setup Utility program After you finish viewing or changing settings, press Esc to return to the Setup Utility program menu (you might have to press Esc several times). If you want to save the new settings, select Save Changes and Exit. Otherwise, your changes will not be saved. 62 User Guide