Lenovo ThinkCentre M57 Hardware Maintenance Manual - Page 50
Flash the system. See Updating flashing BIOS, Diagnostics, Test and Recovery Information - reviews
View all Lenovo ThinkCentre M57 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Diagnostic Error Code 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded 000-197-XXX BIOS test warning 000-198-XXX BIOS test aborted 000-199-XXX BIOS test failed, cause unknown FRU/Action 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 139 2. System board 1. Run Setup 2. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 139 3. System board 1. Reboot the system 2. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 139 3. Run memory test 4. System board 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 139 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 139 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 139 2. Adapter card 3. System board 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 139 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Diagnostics, Test and Recovery Information" on page 39 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Diagnostics, Test and Recovery Information" on page 39 2. Flash the system and retest. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 139 3. Go to "Undetermined problems" on page 62 1. Go to "Undetermined problems" on page 62 2. Flash the system and re-test 3. Replace component under function test 44 Hardware Maintenance Manual