Lenovo ThinkCentre M57 Hardware Maintenance Manual - Page 77
that protects, with your fingers, remove the protective cover
View all Lenovo ThinkCentre M57 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Notes: a. Your microprocessor and socket might look different than the one illustrated. b. Note the orientation of the microprocessor in the socket. Look for the small triangle on one corner of the microprocessor. This is important when reinstalling the microprocessor on the system board. c. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 6. When installing the microprocessor make sure that the small handle is in the vertical position. 7. Holding the new microprocessor 1 with your fingers, remove the protective cover 2 that protects the microprocessor contacts. 8. Holding the microprocessor with your fingers, position the microprocessor so that the triangle 1 is properly aligned with the socket. 9. Lower the microprocessor straight down into the socket. Chapter 8. Replacing FRUs 71