Lexmark 1200 Setup Guide - Page 55
opening for the cable connectors., Otherwise, skip to step 3
UPC - 734646167000
View all Lexmark 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
To install an optional adapter: Warning! All adapters are eas- ily damaged by static electricity. Touch something metal before you touch an adapter. 1 Complete the steps in "Removing the system board" on page 38. 2 Complete the following steps if you need to remove an adapter before you install another one. Otherwise, skip to step 3 on page 50. a Remove the two screws on either end of the opening for the cable connectors. b Gently pull the adapter completely out of the system board connector. c Angle the adapter away from the system board. d Place the adapter in its original packaging. If you did not save the packaging, wrap the adapter in paper and store it in a box. Install memory and network options 49
49
Install memory and network options
To install an optional adapter:
Warning!
All adapters are eas-
ily damaged by static electricity.
Touch something metal before
you touch an adapter.
1
Complete the steps in “Removing the system
board” on page 38.
2
Complete the following steps if you need to
remove an adapter before you install another one.
Otherwise, skip to step 3 on page 50.
a
Remove the two screws on either end of the
opening for the cable connectors.
b
Gently pull the adapter completely out of the
system board connector.
c
Angle the adapter away from the system board.
d
Place the adapter in its original packaging.
If you did not save the packaging, wrap the
adapter in paper and store it in a box.