Lexmark 30G0109 User Manual - Page 122
SMTP Setup menu, Data Bits, Parity, Honor DSR, Primary SMTP Gateway
View all Lexmark 30G0109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Menu item Baud 1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600 Data Bits 7 8 Parity Even Odd None Ignore Honor DSR On Off Description Specifies the rate at which data can be received through the serial port Notes: • 9600 is the factory default setting. • 138200, 172800, 230400, and 345600 baud rates are displayed only in the Standard Serial menu. These settings do not appear in the Serial Option or Serial Option 2 menus. Specifies the number of data bits that are sent in each transmission frame Note: 8 is the factory default setting. Sets the parity for serial input and output data frames Note: None is the factory default setting. Determines whether the printer uses the DSR Signal. DSR is a handshaking signal used by most serial cables. Notes: • Off is the factory default setting. • The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Select On to prevent stray characters from printing. • This menu item appears only if Serial RS-232/RS-422 is set to RS 232. SMTP Setup menu Use the following menu to configure the SMTP server. Menu item Primary SMTP Gateway Primary SMTP Gateway Port Secondary SMTP Gateway Secondary SMTP Gateway Port Description Specifies SMTP server port information Note: 25 is the default SMTP gateway port. Range is 1-65536. Understanding printer menus 122