Lexmark 30G0109 User Manual - Page 42
Installing the printer on a wireless network (Macintosh), Prepare to con the printer
View all Lexmark 30G0109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
7 Connect the cables in the following order: a Temporarily connect a USB cable between the computer on the wireless network and the printer. Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so you can print wirelessly. b If your printer has faxing capabilities, then connect the telephone cable. 8 Follow the on-screen instructions to complete the software installation. 9 To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step 8 for each computer. Installing the printer on a wireless network (Macintosh) Prepare to configure the printer 1 Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address in the space provided below: MAC address 2 If your printer has faxing capabilities, then connect the telephone cable. 3 Connect the power cable, and then turn the power on. Additional printer setup 42