Lexmark 34S0500 User Manual - Page 26
Specify a unit of measurement, Specify the paper height and width, Specify a feed direction, Ready
View all Lexmark 34S0500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Specify a unit of measurement 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . Paper Menu appears. 3 Press . 4 Press the arrow buttons until Universal Setup appears, and then press . 5 Press the arrow buttons until Units of Measure appears, and then press . 6 Press the arrow buttons until the correct unit of measure appears, and then press . Submitting Changes appears, followed by the Universal Setup menu. Specify the paper height and width Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet. Note: Select Portrait Height to adjust the paper height setting or Paper Width to adjust the paper width setting, or adjust both. Instructions to adjust both follow. 1 From the Universal Setup menu, press the arrow buttons until Portrait Width appears, and then press . 2 Press the left arrow button to decrease the setting or the right arrow button to increase the setting, and then press . Submitting Changes appears, followed by the Universal Setup menu. 3 From the Universal Setup menu, press the arrow buttons until Portrait Height appears, and then press . 4 Press the left arrow button to decrease the setting or the right arrow button to increase the setting, and then press . Submitting Changes appears, followed by the Universal Setup menu. 5 Press and release until Ready appears. Specify a feed direction Short Edge is the factory default setting for feed direction for Universal paper settings. The Feed Direction menu will not appear from the Universal Setup menu unless Long Edge is an available setting. If necessary, specify whether the short or long edge of the paper will enter the printer first. 1 From the Universal Setup menu, press the arrow buttons until Feed Direction appears, and then press . 2 Press the arrow buttons until Short Edge or Long Edge appears, and then press . Loading paper and specialty media 26