Lexmark 34S0500 User Manual - Page 87
NPA Mode, Parallel Buffer, Advanced Status, Protocol, Honor Init, Parallel Mode 2
View all Lexmark 34S0500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Menu item NPA Mode Off Auto Parallel Buffer Disabled Auto 3K to Advanced Status Off On Protocol Standard Fastbytes Honor Init On Off Parallel Mode 2 On Off Description Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol Notes: • Auto is the factory default setting. • Changing this setting automatically resets the printer. Sets the size of the parallel input buffer Notes: • Auto is the factory default setting. • The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed. • The parallel buffer size setting can be changed in 1-K increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB and network buffers. • Changing this setting automatically resets the printer. Enables bidirectional communication through the parallel port Notes: • On is the factory default setting. • The Off setting disables parallel port negotiation. Specifies the parallel port protocol Notes: • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting. • The Standard setting tries to resolve parallel port communication problems. Determines whether the printer honors printer hardware initialization requests from the computer Notes: • Off is the factory default setting. • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on. Determines whether the parallel port data is sampled on the leading or trailing edge of strobe Note: On is the factory default setting. Understanding printer menus 87