Lexmark 4227 Lexmark 4227 Plus User's Guide - Page 54
Disabling/Enabling the Operator, Panel
UPC - 734646117104
View all Lexmark 4227 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Using the Operator Panel Disabling/Enabling the Operator Panel All buttons except the Start/Stop, FormFeed, and Load/Unload buttons on the operator panel can be disabled. To disable the operator panel: 1 Turn the printer Off. 2 Press and hold Micro ↓ and Micro ↑ and then turn the printer On. Note: When any button except Start/Stop, FormFeed, or Load/Unload is pressed while the printer is disabled, the Operator Panel Disabled message appears on the display for approximately 2 seconds. To enable the operator panel, repeat the above procedure. 48 Chapter 3: Using the Operator Panel
Chapter 3: Using the Operator Panel
48
Using the Operator Panel
Disabling/Enabling the Operator
Panel
All buttons except the
Start/Stop
,
FormFeed,
and
Load/Unload
buttons on the
operator panel can be disabled. To disable the operator panel:
1
Turn the printer Off.
2
Press and hold
Micro
↓
and
Micro
↑
and then turn the printer On.
Note:
When any button except
Start/Stop,
FormFeed,
or
Load/Unload
is
pressed while the printer is disabled, the
Operator Panel Disabled
message appears on the display for approximately 2 seconds.
To enable the operator panel, repeat the above procedure.