Lexmark C510 Service Manual - Page 101
Message, To locate the, Action, Ensure connector DCN7 on I/O
View all Lexmark C510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
5021-0XX Message To locate the jam... Action 201 Paper Jam Open Rear Door Open rear cover assembly 202 Paper Jam Open rear Open Rear Door cover assembly Indicates media is jammed in inner area (between paper registration sensor and paper exit sensor) of printer. • Open rear cover assembly to access area of paper jam. • Clear all paper from paper path. • Check registration sensor and its actuator. Replace if damaged. See "Paper guide (C) assembly removal" on page 4-47. • Ensure connector DCN16 on I/O board is connected. If connector is attached and error persists, replace I/O board. See "I/O board removal" on page 4-70. If error persists, replace engine controller board. See "Engine controller board removal" on page 4-55. Indicates media is jammed in outer area (fuser exit sensor) of printer. • Open rear cover assembly to access area of paper jam. • Clear all paper from paper path. • Check fuser exit sensor (located in paper exit assembly) and its actuator. Replace if damaged. See "Paper exit assembly removal" on page 4-49. • Ensure connector DCN7 on I/O board is connected. If connector is attached and error persists, replace I/O board. See "I/O board removal" on page 4-70. If error persists, replace engine controller board. See "Engine controller board removal" on page 4-55. Diagnostic information 2-23