Lexmark C510 Service Manual - Page 92

5021-0XX Message 35 Res Save Off Deficient Memory 37 Insufficient Collation Area 37 Insufficient Defrag Memory Description Action Printer lacks memory needed to enable Resource Save. This message usually indicates too much memory is allocated for one or more of printer link buffers. Press Go to disable Resource Save and continue printing. To enable Resource Save after you get this message: • Make sure link buffers are set to Auto, and exit menus to activate link buffer changes. • When Ready is displayed, enable Resource Save from the Setup Menu. Install additional memory. Printer memory (or hard disk, if installed) does not have free space necessary to collate print job. Press Go to print portion of job already stored and begin collating rest of job. Press Menu to open Job Menu and cancel current job. Printer cannot defragment flash memory, because printer memory used to store undeleted flash resources is full. Delete fonts, macros, and other data in printer memory. Install additional printer memory. 2-14 Service Manual