Lexmark C510 Service Manual - Page 215
Setting top margin, Print tests
View all Lexmark C510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
5021-0XX Two alignment pages automatically print for the change made. A correct adjustment is determined when the pages are held to the light and the lines on both pages line up with each other. Note: If you select the Continuous Option under Duplex Quick Test, you will need to press the stop button to cancel the test. 5. Press Return to exit the registration menu. Setting top margin 1. Select Registration. 2. Select Top Margin. 3. Adjust the top margin by increasing the value displayed using Menu. The range is 1 to 15. (Incremented or decremented by one for each button press. Each one is equivalent to .7mm adjustment of top margin.) 4. To save the value press Select. A quick test page automatically prints for the change made. Note: If you select the Continuous Option under Duplex Quick Test, you will need to press the Stop button to cancel the test. 5. Press Return to exit the registration menu. Print tests The purpose of the diagnostic print tests is to verify that the printer can print on media from each of the installed input options. For each input source selected, the following choices are available: Single (prints the print test page once). Continuous (continue printing the print test page until Return or Stop is pressed). • Tray 1 = single, Tray 1 = continuous • Tray 2 = single, Tray 2 = continuous (if installed) Diagnostic aids 3-7