Lexmark C510 Service Manual - Page 224

5021-0XX Printer setup Note: Defaults within this printer can be set to either U.S. or NonU.S. Setting the page count This lets the servicer change the page count from the diagnostic menu. This is used whenever the operator panel cable is replaced because this contains the printer NVRAM memory where the page count is stored. To set the page count: 1. Select Page Counts from the diagnostic menu. To enter diagnostic mode, see "Diagnostic mode" on page 3-4. 2. Select either Color Page Counts or Mono Page Counts. The current page count displays and the leftmost digit blinks, indicating it is the first digit to be changed. 3. Press Menu until the value you want appears. 4. Press Select to move to the next digit. 5. Press Menu until the value you want appears. Continue with each digit until you set the page count. You can skip any digit by pressing Select. 6. Press Select to save the new page count in NVRAM. 7. Press Return or Stop to exit the diagnostic menu. Viewing the permanent page count Note: The permanent page count can only be viewed; it cannot be changed. To view the permanent page count: 1. Select Perm Page Count from the page counts menu. 2. Press Return/Stop to exit the diagnostic menu. 3-16 Service Manual