Lexmark C510 Service Manual - Page 213

5021-0XX • Device tests (displayed only if the flash or disk options are installed - Quick disk test (only when disk is installed) - Disk test/clean (only when disk is installed) - Flash test (only displayed when a non-defective flash memory option is installed) • Printer setup - Setting the page count - Viewing the permanent page count - Setting configuration ID • Error log - Viewing, printing, and clearing the error log • Exit diagnostics Diagnostics menu structure When the diagnostic menu is entered, each diagnostic main menu item displays on the operator panel. When a diagnostic test is selected from the main menu, a sub menu displays and each individual test displays in the order shown. Any options that are referred to in the menus are displayed when the option is installed. Print quality test pages Print Quality Description The Print Quality Test consists of 7 pages. Page 1 contains a mixture of graphics and text, whereas pages 2 and 3 only contain graphics. If Duplex is turned on, then the pages will be duplexed. Otherwise, they are simplexed. The remaining four pages contain color test case information that can be used to help diagnose the source of print defects. Page 1 text consists of the following, and is printed in English: • Value of the Diagnostic EP SETUP settings. • Contents of the Diagnostic error log. • Printer configuration information, (printer serial number, RIP code level, Engine code level, Panel code level, Smart Option code levels, Font version,and so on). Diagnostic aids 3-5