Lexmark C510 Service Manual - Page 98
Fuser Life, Fuser Missing
View all Lexmark C510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5021-0XX Message Description Action 87 Fuser Exhausted Fuser is completely used. Replace fuser. If problem persists, check cable for continuity that connects engine controller board connector FUCN and fuser. If cable is bad, replace cable. Otherwise, replace engine controller board. Go to "Engine controller board removal" on page 4-55. 87 Fuser Life Warning Fuser is nearing end of life. Press Go to clear message and continue printing. Replace fuser. Go to "Fuser assembly removal" on page 4-9. Note: Fuser is a customer ordered part. If problem persists, check cable for continuity that connects engine controller board connector FUCN and fuser. If cable is bad, replace cable. Otherwise, replace engine controller board. Go to "Engine controller board removal" on page 4-55. 87 Fuser Missing Fuser is either missing or incorrectly installed. Correctly install fuser. Go to "Fuser assembly removal" on page 4-9. If problem persists, check cable for continuity that connects engine controller board connector FUCN and fuser. If cable is bad, replace cable. Otherwise, replace engine controller board. Go to "Engine controller board removal" on page 4-55. 2-20 Service Manual