Lexmark E310 Service Manual - Page 62
Operator Panel Configuration Mode Button Definition, Configuration Mode Operator Panel Overlays
UPC - 734646183000
View all Lexmark E310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4044-XXX Operator Panel Configuration Mode Button Definition Term Brief Button Press Long Button Press Double-Click Button Press Description Press the operator panel button no longer than three seconds. Press and hold the operator panel button for more than three seconds. Press and release the operator panel button two times. Each press and release action must be performed within a half second. Result This action moves through the configuration mode settings. This action selects and saves the setting for the menu item displayed. To indicate that the setting is saved, all LEDs blink once. This action moves through the configuration mode menu. Perform the following steps to enter the configuration mode: 1. Turn the printer power off. 2. Open the top cover. 3. Turn the printer power on. 4. When the Error LED comes on solid, double-click the operator panel button. 5. When the Error and Press Button LEDs start blinking, close the top cover. The Ready LED comes on solid and the Error and Press Button LEDs continue blinking. 6. Double-click the operator panel button two times. The Load Paper LED comes on solid while the Error and Press Button LEDs continue blinking. 7. Perform a long button press. All LEDs blink once. The Ready LED stays on solid. The printer is in the configuration mode. 8. To exit the configuration mode, turn the printer power off. Configuration Mode Operator Panel Overlays When in configuration mode, the first menu item and its setting are displayed. The first menu item is the Parallel Port and is indicated by 3-4 Service Manual