Lexmark E310 Service Manual - Page 70
Restoring Factory Defaults, Turn the printer power off.
UPC - 734646183000
View all Lexmark E310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4044-XXX 4. When the Error LED comes on solid, double-click the operator panel button. 5. Once the Error and Press Button LEDs start to blink, close the top cover. 6. The Ready LED comes on solid and the Error and Press Button LEDs continue blinking. 7. Double-click the operator button three times. The Paper Jam LED comes on solid while the Error and Press Button LEDs continue blinking. 8. Perform a long button press until all LEDs come on solid. The printer is in Hex Trace mode 9. To exit the Hex Trace mode, turn the printer power off. Restoring Factory Defaults Restoring factory defaults returns the printer settings to the original factory settings. Perform the following steps to invoke factory defaults: 1. Turn the printer power off. 2. Open the top cover. 3. Turn the printer power on. 4. When the Error LED comes on solid, double-click the opera- tor panel button. 5. Once the Error and Press Button LEDs start blinking, close the top cover. 6. The Ready LED comes on solid and the Error and Press Button LEDs continue blinking. 7. Double-click the operator button one time. The Data LED comes on solid while the Error and Press Button LEDs continue blinking. 8. Perform a long button press until all LEDs come on solid. 9. The printer is reset to factory defaults. 3-12 Service Manual