Lexmark MX611 Quick Reference - Page 24
x]- jam, remove all s from the, finisher's accumulator. Leave paper in, bin. [45y.xx]
View all Lexmark MX611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3 Lift the staple guard, and then remove any jammed or loose staples. 6 Close the staple access door. 2 Move the tamper arms to the sides. 4 Press down the staple guard until it clicks into place. 5 Insert stapler cartridge back into the finisher until it clicks into place. 7 If necessary, touch Done from the printer control panel to clear the message and continue printing. [x]-page jam, remove all pages from the finisher's accumulator. Leave paper in bin. [45y.xx] Paper jam in the finisher bin 1 Empty the standard bin. 3 Remove all jammed pages from inside the access areas. Note: Make sure all paper fragments are removed. 4 If necessary, touch Done from the printer control panel to clear the message and continue printing. 24
3
Lift the staple guard, and then remove any jammed or loose staples.
4
Press down the staple guard until it
clicks
into place.
5
Insert stapler cartridge back into the finisher until it
clicks
into place.
6
Close the staple access door.
7
If necessary, touch
Done
from the printer control panel to clear the
message and continue printing.
[x]-page jam, remove all pages from the
finisher’s accumulator. Leave paper in
bin. [45y.xx]
Paper jam in the finisher bin
1
Empty the standard bin.
2
Move the tamper arms to the sides.
3
Remove all jammed pages from inside the access areas.
Note:
Make sure all paper fragments are removed.
4
If necessary, touch
Done
from the printer control panel to clear the
message and continue printing.
24