Lexmark MX611 Quick Reference - Page 25

Paper jam in the finisher rear door

Page 25 highlights

Paper jam in the finisher rear door 1 Open the finisher rear door. Note: After removing any jammed paper in the finisher rear door, open the trap door to remove any paper fragments. 5 Close the finisher rear door. 4 Close the trap door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 6 If necessary, touch Done from the printer control panel to clear the message and continue printing. 3 Open the finisher trap door, and then remove any paper fragments from inside the trap door. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

Paper jam in the finisher rear door
1
Open the finisher rear door.
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note:
Make sure all paper fragments are removed.
3
Open the finisher trap door, and then remove any paper fragments
from inside the trap door.
Note:
After removing any jammed paper in the finisher rear
door, open the trap door to remove any paper fragments.
4
Close the trap door.
5
Close the finisher rear door.
6
If necessary, touch
Done
from the printer control panel to clear the
message and continue printing.
25