Lexmark MX711 Quick Reference - Page 12

3 Slide the width guide to the correct position for the size of the paper you are loading. Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them. • Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface. 5 Load the paper or specialty media. Note: Slide the stack gently into the multipurpose feeder until it comes to a stop. • Load only one size and type of paper or specialty media at a time. • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled. One‑sided (simplex) printing Two‑sided (duplex) printing Note: Use the paper size indicators on the bottom of the tray to help position the guides. 4 Prepare the paper or specialty media for loading. • Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. ABC • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface. 12