Lexmark MX711 Quick Reference - Page 26
jam, open automatic feeder top, cover. [28y.xx]
View all Lexmark MX711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4 Slide the paper guide until it rests lightly against the edge of the paper. 2 Open the ADF cover. 2 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 3 Reload paper into the multipurpose feeder. 5 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, open automatic feeder top cover. [28y.xx] 1 Remove all original documents from the ADF tray. Note: The message is cleared when the pages are removed from the ADF tray. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 Close the ADF cover. 5 Open the scanner cover. 26
2
Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
3
Reload paper into the multipurpose feeder.
4
Slide the paper guide until it rests lightly against the edge of the
paper.
5
From the printer control panel, touch
Done
to clear the message
and continue printing.
[x]
‑
page jam, open automatic feeder top
cover. [28y.xx]
1
Remove all original documents from the ADF tray.
Note:
The message is cleared when the pages are removed from
the ADF tray.
2
Open the ADF cover.
3
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note:
Make sure all paper fragments are removed.
4
Close the ADF cover.
5
Open the scanner cover.
26