Lexmark MX711 User's Guide - Page 187

Understanding the printer menus Use Timeouts Hibernate Timeout Disabled 1-3 hr 6 hr 1-3 days 1-2 weeks 1 month Timeouts Hibernate Timeout on Connection Hibernate Do Not Hibernate Timeouts Screen Timeout 15-300 Timeouts Prolong Screen Timeout On Off Timeouts Print Timeout Disabled 1-255 Timeouts Wait Timeout Disabled 15-65535 187 To Set the printer to operate at a low power state. Note: Disabled is the factory default setting in all countries. Set the printer to Hibernate Timeout even when there is an active Ethernet or a phone connection. Note: Do Not Hibernate is the factory default setting. Set the amount of time in seconds the printer waits before returning the printer display to a Ready state. Note: 30 is the factory default setting. Set the printer to continue a specified job without returning to the home screen when the screen timeout timer expires. Note: Off is the factory default setting. Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the remainder of the print job. Notes: • 90 is the factory default setting. • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting. • Print Timeout is available only when using PCL emulation. This has no effect on PostScript emulation print jobs. Set the amount of time in seconds the printer waits for additional data before canceling a print job. Notes: • 40 is the factory default setting. • Wait Timeout is available only when the printer is using PostScript emulation. This has no effect on PCL emulation print jobs.