Lexmark MX711 User's Guide - Page 50
Installing hardware options, Order of installation, Installing optional trays
View all Lexmark MX711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Additional printer setup 50 Installing hardware options Order of installation CAUTION-POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION-SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. CAUTION-TIPPING HAZARD: Floor‑mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high‑capacity tray and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters. Install the printer and any hardware options you have purchased in the following order: • Caster base • 2100‑sheet tray or spacer • Optional 550‑ or 250‑sheet tray • Printer For more information on installing a caster base, optional 250‑ or 550‑sheet tray, spacer, or 2100‑sheet tray, see the setup sheet that came with the option. Installing optional trays The printer supports the following optional input sources: • 250‑ or 550‑sheet tray • 2100‑sheet tray CAUTION-POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION-SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. CAUTION-TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity tray and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters. 1 Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.