Lexmark MX711 User's Guide - Page 86

Paper and specialty media guide 86 For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link. Storing paper Use these paper storage guidelines to help avoid jams and uneven print quality: • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18-24°C (65-75°F) with relative humidity between 40 and 60 percent. • Store paper in cartons, on a pallet or shelf, rather than on the floor. • Store individual packages on a flat surface. • Do not store anything on top of individual paper packages. • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat. Supported paper sizes, types, and weights The following tables provide information on standard and optional paper sources and the types of paper they support. Note: For an unlisted paper size, select the closest larger listed size. Supported paper sizes Paper size1 Dimensions 250‑ or 550‑sheet trays 2100‑sheet tray Multipurpose Duplex ADF feeder Scanner glass A4 210 x 297 mm (8.3 x 11.7 in.) A5 148 x 210 mm 3 (5.8 x 8.3 in.) A6 105 x 148 mm (4.1 x 5.8 in.) X X JIS B5 182 x 257 mm (7.2 x 10.1 in.) X Letter 216 x 279 mm (8.5 x 11 in.) Legal 216 x 356 mm (8.5 x 14 in.) 1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support. 2 To support two‑sided (duplex) printing, the Universal width must be between 105 mm (4.13 inches) and 216 mm (8.5 inches); the Universal length must be between 216 mm (8.5 inches) and 356 mm (14 inches). 3 Paper is supported in long‑edge orientation.