Lexmark Monochrome Laser Administrator's Guide (1.4 MB) - Page 109
Std Par ENA, Std Ser Fax
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Attendance message 54 Standard Serial Error 54 Serial Option x Error 54 Std Par ENA Connection Lost 54 Par x ENA Connection Lost Meaning and required action A serial interface error is detected (framing or parity) on the standard serial port. This error usually indicates the serial link has not been set up correctly. When the serial error displays, the reporting of other serial errors is suppressed until interface parameters are changed or the printer is reset. A serial interface error is detected (framing or parity) on serial port x, where x is optional serial port 1 or 2. This error usually indicates the serial link has not been set up correctly. When the serial error displays, the reporting of other serial errors is suppressed until interface parameters are changed or the printer is reset. Displays only during the printer power on cycle to indicate the connection to an external print server (also called an external network adapter or ENA) is lost. 54 Std Ser Fax Connection Lost 54 Ser x Fax Connection Lost The standard serial port or serial port x, where x is an optional serial port, is configured to receive fax data, but the connection to the external modem has been lost. If Fax Port in the FAX MENU is not set to Disabled, the printer automatically assumes a modem is connected for fax processing. See "Fax Menu" on page 84. 54 Std Network Software Error 54 Network x Software Error The printer has detected that a network port is installed but cannot establish communications with it. • It may be necessary to program new firmware in the network interface via the parallel port after this message has been cleared. Check the interface to: • Verify you are using the correct cable. • Make sure the parallel or serial interface parameters (protocol, baud, parity, data bits) are correct. If one of these messages display: • Press Go to clear the message and continue printing. However, some data may not print or may not print correctly. • Reset the printer. Press Menu> or or