Lexmark Monochrome Laser Administrator's Guide (1.4 MB) - Page 63
Job Buffering, Disabled, Defective Disk, Advanced Status, Standard, Fastbytes, Honor Init, defective
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Parallel Menu (continued) Menu item Job Buffering Advanced Status Protocol Honor Init * Factory default Values Off* On Job Buffering lets you delay processing of a print job. The job is temporarily stored on a hard disk before being printed, usually freeing the host computer while the job prints. The Job Buffering menu item only displays if the installed hard disk is formatted and is not defective, Read/Write or Write protected, and if Job Buffer Size is not set to Disabled. 61 Defective Disk may display when the printer is turned on, or during disk format and write operations. See page 112 for details. If Job Buffering is set to On, print jobs are buffered to the hard disk. If Job Buffering is set to Off, print jobs are not buffered. Note: Changing the Job Buffering setting automatically resets the printer. Off On* If Advanced Status is set to On, bidirectional communication is enabled through the parallel interface. Standard Fastbytes* You can select Standard or Fastbytes protocol for the parallel interface. Fastbytes is compatible with most existing parallel interface implementations. Use Standard only if you experience parallel interface problems. Refer to the Technical Reference for more information about the parallel interface. Off* On The Honor Init setting determines whether the printer honors hardware initialization requests from the computer. The computer requests initialization by activating the INIT signal on the parallel interface. Many personal computers activate the INIT signal each time the computer is turned on and off. Using the Operator Panel and Menus 63