Lexmark Optra S Service Manual - Page 30
Thermistor Circuit. Go to the, Transfer Roll Service Check
View all Lexmark Optra S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4059-XXX Error Code Action 910 DC Pick Motor DC Pick Motor Stall 911 DC Pick Motor Excessive PWM Error Codes 910,911,912,913 and 914 are indications that a Tray 1 paper feed problem has been detected. Go to the "Input Tray(s) Option Service Check" on page 2-58. 912 DC pick motor below speed 913 DC pick motor over speed 914 DC pick motor: No encoder feedback 917 Transfer Roll Indicates a problem in the transfer roll area. Go to the "Transfer Roll Service Check" on page 2-105. 920 Fuser Error Indicates that the fuser is below temperature when printing. Go to the "Cold Fuser Service Check" on page 2-48. 921 Fuser Error Indicates that the fuser is below standby temperature when the printer is idle. Go to the "Cold Fuser Service Check" on page 2-48. 922 Fuser Error Fuser failed to reach standby temperature. Go to the "Cold Fuser Service Check" on page 2-48. 923 Fuser Error Fuser is too hot during printing or when printer is idle. Go to the "Hot Fuser Service Check" on page 2-50. 924 Fuser Error An open circuit has been detected in the Fuser Thermistor Circuit. Go to the "Hot Fuser Service Check" on page 2-50. 925 Fuser Error Wrong fuser lamp installed. Check the fuser lamp for the correct type of lamp that should be installed. 927 Fan Stalled Indicates a printer fan stalled. Go to the "Fan Service Check" on page 2-47. 928 Erase Lamps Indicates that the engine has detected that either the erase lamp assembly is missing or disconnected. Go to the "Erase Lamp Service Check" on page 2-46. 2-3 4059 Service Manual