Lexmark W812 User's Reference - Page 39
Set the Paper Size to A4.
View all Lexmark W812 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Symptom Incorrect margins Clipped images Cause Solution • Guides in the selected tray are set for a different size paper than what is loaded in the tray. • Auto size sensing is set to Off, but you loaded a different size paper in a tray. For example, you inserted A4 size paper into the selected tray but did not set the Paper Size to A4. • Move the guides in the tray to the proper positions for the size loaded. See Loading the trays for detailed instructions on adjusting the guides in each tray. • Set the Paper Size to A4. Guides in the selected tray are set for a different size paper than what is loaded in the tray. Move the guides in the tray to the proper positions for the size loaded. See Loading the trays for detailed instructions on adjusting the guides in each tray. Ghost images Toner level is low in the print cartridges. • Make sure the Paper Type setting is correct for the paper or specialty media you are using. • Remove the print cartridge and shake it gently back and forth to use the remaining toner. • Replace the print cartridge. See Replacing the print cartridge. The paper curls badly once it prints and exits to the output bin. The Type setting is wrong for the type of paper or specialty media you are using. Change Paper Type from Bond to Plain Paper. 39