Lexmark W812 User's Reference - Page 75

28 Disabling the operator panel menus A network administrator can lock the printer menus to keep others from changing default menu settings from the operator panel. To disable the menus: 1 Turn the printer off. 2 Press and hold the Select and Return buttons, and then turn the printer on. 3 Release the buttons when Performing Self Test appears on the display. When the printer self test completes, Config Menu appears. 4 Press Menu until you see Panel Menus, and then press Select. 5 Press Menu until you see Disable, and then press Select. Saved briefly appears, followed by Disabling Menus. Config Menu appears again with Panel Menus on the second line. 6 Press Menu until you see Exit Config Menu, and then press Select. Activating Menu Changes briefly appears, followed by Performing Self Test. The printer returns to the Ready message. Note: Once this procedure is completed, if the Menu button is pressed when the printer displays the Ready status message, the message Menus Disabled appears. If the printer is holding a confidential job or held job (Reserve Print, Repeat Print, or Verify Print), you can still access these jobs through the Job Menu. Enabling the menus To enable the menus, repeat the steps in Disabling the operator panel menus. However, in step 5 on page 75, select Enable instead of Disable. After you press Select, Enabling Menus is displayed. 75