LiftMaster APT APT LOGIC 3 Manual - Page 4

Operator Specifications - ats operator

Page 4 highlights

OPERATOR SPECIFICATIONS MOTOR TYPE Continuous Duty HORSEPOWER 1/2 HP SPEED 1725 RPM VOLTAGE 115 Volts - Single phase CURRENT See Motor Nameplate ELECTRICAL TRANSFORMER 24VAC CONTROL STATION NEMA 1 3-Button Station. Open/Close/Stop w/ LED WIRING TYPE C2 (Factory Shipped) Momentary contact to OPEN & STOP, constant pressure to CLOSE, plus wiring for sensing device to reverse and auxiliary devices to open and close with open override. See pages 16 and 17 for optional wiring types and operating modes. LIMIT ADJUST Linear driven, fully adjustable screw type cams. Adjustable to 24'. MECHANICAL DRIVE REDUCTION Primary: Heavy duty (5L) V-Belt. Secondary: #41 chain/sprocket. Output: #48 chain OUTPUT SHAFT SPEED 96 R.P.M. DOOR SPEED 7-8" per second depending on door BRAKE Solenoid actuated disc brake BEARINGS Output Shaft: Shielded Ball Bearing. Clutch Shaft: Iron Copper sintered and oil impregnated. SAFETY DISCONNECT Quick disconnect door arm for emergency manual door operation. SAFETY PHOTO EYES (Optional CPS-L): Through beam or retro reflective devices used to provide non-contact safety protection. SAFETY EDGE (Optional): Electric or pneumatic sensing device attached to the bottom edge of door. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

4
MECHANICAL
DRIVE REDUCTION:
. . . . . . . .Primary: Heavy duty (5L) V-Belt.
Secondary:
#41 chain/sprocket.
Output: #48 chain
OUTPUT SHAFT SPEED:
. . . . . . . . . . . . . . . . . . . . . . .96 R.P.M.
DOOR SPEED:
. . . . . . . . . .7-8" per second depending on door
BRAKE:
. . . . . . . . . . . . . . . . . . . . .Solenoid actuated disc brake
BEARINGS:
. . . . . . . . . . . .Output Shaft: Shielded Ball Bearing.
Clutch Shaft: Iron Copper sintered and oil impregnated.
MOTOR
TYPE:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Continuous Duty
HORSEPOWER:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/2 HP
SPEED:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1725 RPM
VOLTAGE:
. . . . . . . . . . . . . . . . . . . . . . .115 Volts - Single phase
CURRENT:
. . . . . . . . . . . . . . . . . . . . . . . . .See Motor Nameplate
SAFETY
DISCONNECT:
. . . . . . . . . . . . . . .Quick disconnect door arm for
emergency manual door operation.
SAFETY PHOTO EYES (Optional CPS-L):
Through beam or retro
reflective devices used to provide non-contact
safety protection.
SAFETY EDGE (Optional):
Electric or pneumatic sensing device
attached to the bottom edge of door.
ELECTRICAL
TRANSFORMER:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24VAC
CONTROL STATION:
. . . . . . . . . . . . . .NEMA 1 3-Button Station.
Open/Close/Stop w/ LED
WIRING TYPE:
. . . . . . . . . . . . . . . . . . . . . .C2 (Factory Shipped)
Momentary contact to OPEN & STOP, constant pressure to
CLOSE, plus wiring for sensing device to reverse and auxiliary
devices to open and close with open override. See pages 16 and
17 for optional wiring types and operating modes.
LIMIT ADJUST:
. . . . . .Linear driven, fully adjustable screw type
cams. Adjustable to 24'.
OPERATOR SPECIFICATIONS