Magnavox MDV453 User Manual - Page 15

Playing a Disc 15 Before you begin, turn on the power of the TV, stereo, and any other equipment connected to the DVD Player. Make sure the TV and the stereo (if applicable) are set to the correct channel. Details are on pages 8-14. 1 Press STANDBY-ON y to turn on the Player. P-ON will appear briefly on the Player's display panel. 2 Press OPEN/CLOSE A to open the Disc tray. 3 Place a Disc into the tray. If the DVD is recorded on only one side, place the Disc in the tray with the label facing up and the shiny side facing down. Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up. 1 5 STANDBY-ON REPEAT A-B OPEN/ CLOSE DISPLAY SKIP PAUSE 2 4 1 2 4 5 7 8 CLEAR 0 MENU AUDIO 3 SUBTITLE 6 ANGLE 9 SEARCH MODE +10 TITLE MODE ZOOM OK SETUP RETURN MARKER 4 Press Play B to close the tray. The tray will close and play will begin. If play does not start automatically, press Play B again. If a DVD menu appears instead, see page 20. To play MP3 and JPEG files, see page 29. You also can close the tray by pressing OPEN/CLOSE A. 5 Press Stop C to stop playback. Remember, this DVD Player will play only certain Discs. See page six for details. Helpful Hints • An "X" may appear in the top right corner of the TV screen when you try a feature. This means either the feature you tried is not available on the Disc, or the Player cannot access the feature at this time. This does not indicate a problem with the Player. • If a Disc is dirty or has scratches, the pictures may appear distorted and play may stop. In such cases, remove the Disc and turn off the Player. Unplug the power cord, then reconnect it to the power outlet. Clean the Disc, then turn on the Player again and reinsert the Disc for playback. • If a Disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer. This is not a malfunction.