Marantz DV9500 DV9500 User Manual - Page 37
Setting up the Audio Setup 1
View all Marantz DV9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
English DVD Setup Menu Setting up the Audio Setup 1 1 Press the SET UP button. 2 Select Setup using the cursor buttons (5/ ∞), then press the cursor (3) or ENTER button. 3 Select Audio Setup 1 using the cursor buttons (5/∞), then press the cursor (3) or ENTER button. 4 Use the cursor buttons (5/∞) to select the desired item, then press the cursor (3) or ENTER button. Note To make the SETUP menu disappear or return to the menu screen during setup, press the RETURN or cursor button (2). 6 * You only need to make this setting if you connected this system to another component (AV amplifier, etc.) using one of the digital outputs. Digital Out • Default setting: On If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On. Note that you can't switch on/off the optical and coaxial outputs individually. Note Super Audio CD will not output digital sound. Dolby Digital Out* • Default setting: Bit Stream If your AV amplifier (or other connected component) is Dolby Digital compatible, set to Bit Stream, otherwise set to PCM. DTS Out* • Default setting: Bit Stream If your AV amplifier (or other connected component) has a built-in DTS decoder, set this to Bit Stream, otherwise set to PCM. Check the manual that came with the other component if you're unsure whether it is DTS compatible. Important If you set to Bit Stream with a non-DTS compatible amplifier, noise will be output when you play a DTS disc. MPEG Out* • Default setting: PCM If your AV amplifier (or other connected component) is compatible with MPEG audio, set this to Bit Stream, otherwise set it to PCM (MPEG audio is converted to more compatible PCM audio). Check the manual that came with the other component if you're unsure whether it is MPEG audio compatible. 37