Marantz DV9500 DV9500 User Manual - Page 52
Select Resolution, Resolution, Select Format, Format
View all Marantz DV9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
6 DVD Setup Menu HDMI This setting is used when the unit is connected by HDMI or DVI with a TV or projector. This setting is enabled only when the HDMI option of the FL menu is On. (page 32) Press ENTER Note • The resolutions available for HDMI outputs depend on the connected TV or projector. For details, see the user's manual of your TV or projector. • If, after changing the resolution, images are not displayed properly on the TV or projector, press and hold the MENU button for two seconds to bring up the FL menu. Then set HDMI RESET to reset. (page 32) • VGA can be outputed only when TV System is set to NTSC. • When the resolution changes, the image may be corrupted or the output may take longer than normal. 2 Select Format 1 Select Resolution • VGA • 480p/576p (525p/625p) • 720p (750p) • 1080i (1125i) Select one of the above with the cursor buttons (5/∞) and then press the ENTER button. • RGB-Normal • RGB-Expand • YCbCr-1 (4:4:4) • YCbCr-2 (4:2:2) Select one of the above with the cursor buttons (5/∞) and then press the ENTER button. Note • Image data values in RGB-Normal format range between 16 (black) and 235 (white). • Image data values in RGB-Expand format range between 0 (black) and 246 (white). • The formats available for HDMI outputs depend on the connected TV or projector. For details, see the user's manual of your TV or projector. • Only RGB-Normal and RGB-Expand can be selected for DVI outputs. • When black rise to the surface depending on the display, black Setup in the Video Adjustment set to OIRE. 52