Marantz DV9500 DV9500 User Manual - Page 53
Select TV Aspect, TV Aspect, Setup Examples, Select Audio, Audio
View all Marantz DV9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
English DVD Setup Menu 3 Select TV Aspect • 4:3 L - Box • 4:3 Pan Scan • 16:9 Wide • 16:9 Squeeze Select one of the above with the cursor buttons (5/∞) and then press the ENTER button. 6 Note • The TV aspect ratios available for HDMI outputs depend on the connected TV or projector. For details, see the user's manual of your TV or projector. • Only 16:9 Wide and 16:9 Squeeze can be selected when the HDMI/DVI resolution is set to 720p or 1080i. • When this TV Aspect is in effect, it also determines the aspect output of Composite Video, S-Video, and Component Video. Setup Examples Resolution (HDMI Setting) Playback Disc Disc Recorded in Squeeze Ratio Disc Recorded in 4:3 Ratio Aspect (HDMI Setting) Monitor Settings Aspect (HDMI Setting) Monitor Settings 480p/576p (525p/625p) 720p/1080i (750p/1125i) 16:9 Wide 16:9 Squeeze Full/Squeeze Normal/Through 4:3 16:9 Wide 16:9 Squeeze Standard Normal 4:3 Through Some monitors may use setting names that are different than those shown here. 4 Select Audio • Auto: Audio is output as a bit stream when the connected device is set to Dolby Digital, DTS, or MPEG. Audio is output as linear PCM when the connected device is set to Linear PCM. If the connected device cannot accept bit streams, audio will be output as linear PCM. • PCM: Audio is converted to linear PCM. Select one of the above with the cursor buttons (2/3). Note • Audio is not output from Super Audio CDs or DVD-Audio discs with CPPM protection. • Audio is not output when the player is connected to a device with an HDCP-compatible DVI jack. • All of PCM signal from digital out is converted to 44.1kHz/48kHz. • If DTS is played when connected equipment is set to PCM or Audio is set to PCM, the output of analog output from the unit is impossible. • Turn the power on the front panel OFF during play or pause. Noise from a television etc. may come out. • When the video output has been turned off using the VIDEO ON/OFF button on the remote control, audio cannot be output (see page 15). • When the video output has been set to Off in Pure Mode and CD or Super Audio CD have been played, audio cannot be output. 53