Marantz NR1501 NR1501 User Manual - English - Page 17
Selecting An Input Source, Adjusting The Main Volume, Adjusting The Tone Bass & Treble, Control
View all Marantz NR1501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CONNECTIONS FUNCTIONS NAMES AND BASIC SELECTING AN INPUT SOURCE Before you can listen to any input media, you must first select the input source on the unit. Example : DVD ADJUSTING THE MAIN VOLUME ENGLISH ADJUSTING THE TONE (BASS & TREBLE) CONTROL BASIC OPERATION TEMPORARILY TURNING OFF THE SOUND To select DVD, turn the INPUT SELECTOR knob on the front panel or press the DVD button on the remote controller two times in a row. After you have selected DVD, simply turn on the DVD player and play the DVD. • As the input source is changed, the input name will appear in the display, on the front-panel. • If you use the FUNCTION RENAME feature (see page 20) , the renamed name appears on the display. • As the input is changed, this unit will automatically switch to the digital input and surround mode, which were entered during the configuration process for that source. Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOLUME + / - buttons on the remote controller. To increase the volume, turn the VOLUME knob clockwise or press VOLUME + button on the remote controller, to decrease the volume, turn counterclockwise or press VOLUME - button on the remote controller. Note • If the channel level has been set to +1 dB or more using the CHANNEL LEVEL setting, the maximum volume level will be reduced to below 80. (See page 24.) During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics. (Using the remote controller) To adjust the tone, press the AMP button. To adjust the bass effect, press BASS + or BASS - button. To adjust the treble effect, TREBLE + or TREBLE - button. Notes The tone control functions cannot be used in the modes given below. • SOURCE DIRECT mode • When the ROOM EQ function is used To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the remote controller. This will interrupt the output to all speakers and the head-phone jack, but it will not affect any recording or dubbing that may be in progress. When the system is muted, the display will show "MUTE" . Press the MUTE button again to return to normal operation. BASIC OPERATION ADVANCED CONNECTIONS SETUP ADVANCED OPERATION TROUBLESHOOTING OTHERS 13