Marantz NR1501 NR1501 User Manual - English - Page 24

ENGLISH NAMES AND FUNCTIONS CONNECTIONS BASIC OPERATION ADVANCED CONNECTIONS BASIC SETUP 2. INPUT SETUP The input source connected to the unit is set by following the steps below. INPUT >Blu-ray GAME DVD DSS VCR CD AUX1 AUX2 SETUP CONFIG CONFIG CONFIG CONFIG CONFIG CONFIG CONFIG CONFIG RETURN TO MAIN MENU 1. On the INPUT SETUP OSD menu, press the 3/4 cursor buttons to select the function whose settings are to be established. When the ENTER button is now pressed, the corresponding sub-menu is displayed. Blu-ray CONFIG >NAME :BLU-RAY DIGITAL IN :--- AUDIO MODE :HDMI AUTO SURROUND:AUTO LIP SYNC :0ms RETURN TO INPUT SETUP 2-1 NAME The names of the input functions can be changed as desired. The maximum number of characters that can be registered for these names is 8 including spaces. The function names that have been registered appear on the unit's display.
1.
Press the 3/4 cursor buttons to select NAME on the INPUT SETUP sub-menu, and press the ENTER button.
2.
The cursor moves to the renaming area. Blu-ray CONFIG >NAME :BLU-RAY DIGITAL IN :--- AUDIO MODE :HDMI AUTO SURROUND:AUTO LIP SYNC :0ms
3.
Press the 1/2 cursor buttons to move the cursor (blinking display) to the position of the character that is to be changed.
4.
Press the 3/4 cursor buttons to select the character.

Any of the characters listed below can be selected to replace the existing characters.

A~Z 0~9
5.
After all the changes have been made, press the ENTER button to enter the changes. 2-2 DIGITAL IN The DIGITAL AUDIO IN1, 2 and 3 terminals on the unit's rear panel can be allocated to the desired input functions. (The numbers of the input terminals are allocated.)
1.
Press the 3/4 cursor buttons to move the cursor to DIGITAL IN on the INPUT SETUP sub-menu. Blu-ray CONFIG NAME :BLU-RAY >DIGITAL IN :1 AUDIO MODE :HDMI AUTO SURROUND:AUTO LIP SYNC :0ms RETURN TO INPUT SETUP
2.
Press the 1/2 cursor buttons to select the digital input. 1: OptiDBl iOput 2: OptiDBl iOput 3: $PBYiBl DBCle iOput If "@
@
@" iT TeleDteE Bt thiT pPiOt OP EiHitBl iOput will Ce BllPDBteE 2-3 AUDIO MODE The audio signals (analog input, digital input, HDMI input) that are to be input to the unit are set by following the steps below.
1.
Press the 3/4 cursor buttons to move the cursor to AUDIO MODE on the INPUT SETUP sub-menu. Blu-ray CONFIG NAME :BLU-RAY DIGITAL IN :--- >AUDIO MODE :HDMI AUTO SURROUND:AUTO LIP SYNC :0ms RETURN TO INPUT SETUP
2.
Press the 1/2 cursor buttons to select the AUTO, HDMI, DIGITAL or ANALOG audio mode. • AUTO At this setting, the audio signals that are input to the unit are detected. The playback signals are selected automatically in the sequence of HDMI input → digital input → analog input. • HDMI At this setting, the HDMI input signals are played. Select this mode to use only HDMI signals. Note A function with no HDMI input (functions other than Blu-ray, GAME, DVD or DSS) cannot be set to this mode. • DIGITAL At this setting, the digital input signals are played. Select this mode to use only digital signals. • ANALOG At this setting, the analog input signals are played. Select this mode to use only analog signals. Note A function with no analog input (such as Blu-ray or GAME) cannot be set to this mode. 2-4 AUTO SURROUND The function which automatically selects the surround mode that supports the input signals is set by following the steps below.
1.
Press the 3/4 cursor buttons to move the cursor to AUTO SURROUND on the INPUT SETUP sub-menu. Blu-ray CONFIG NAME :BLU-RAY DIGITAL IN :--- AUDIO MODE :HDMI >AUTO SURROUND:AUTO LIP SYNC :0ms RETURN TO INPUT SETUP
2.
Press the 1/2 cursor buttons to select ON or OFF. • ON At this setting, the surround mode that supports the audio signals which have been input is selected automatically, and played. • OFF At this setting, the manual mode is established. Set the surround mode desired. Tip For details on the surround mode manual settings, refer to "SURROUND MODE" (page 38). 20 RETURN TO INPUT SETUP SETUP ADVANCED OPERATION TROUBLESHOOTING OTHERS