Marantz NR1501 NR1501 User Manual - English - Page 25

CONNECTIONS FUNCTIONS NAMES AND BASIC BASIC OPERATION ADVANCED CONNECTIONS ENGLISH 2-5 LIP SYNC With some video components connected to the unit, there may be a time lag between the video signal processing and the audio signals. While it may be a mere time lag, it can seriously affect the enjoyment of movies or music. The LIP.SYNC function delays the audio signals and adjusts the difference in their timing from the video signals. The default setting is 0 ms, and adjustment up to 200 ms is possible.
1.
Press the 3/4 cursor buttons to move the cursor to LIP SYNC on the INPUT SETUP sub-menu. Blu-ray CONFIG NAME :BLU-RAY DIGITAL IN :--- AUDIO MODE :HDMI AUTO SURROUND:AUTO >LIP SYNC :0ms RETURN TO INPUT SETUP • Press the 1/2 cursor buttons to adjust the time lag. Tip For adjusting the time lag while monitoring the images on the display, projector or other video component, refer to "LIP.SYNC FUNCTION" (page 28). Note • 0 ms is set for this function in the SOURCE DIRECT mode. When the SOURCE DIRECT mode is released, the value that has been set is restored. 3 SPEAKER/R. EQ SETUP After you have installed the unit connected all the components and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout. Before you perform the following settings, it is important that you first determine the following characteristics: • AUTO SETUP: "3-1 AUTO SETUP" (see page 22) • MANUAL SETUP: "SPEAKER COFIG" (see page 22) "SPEAKER DISTANCE" (see page 23) "SPEAKER CROSSOVER" (see page 23) "ROOM EQ SETUP" (see page 23) 1. Select "SPEAKER SETUP" from the MAIN MENU with 3 or 4 cursor buttons and press the ENTER button. SPEAKER/R.EQ SETUP >AUTO SETUP SPEAKER SPEAKER SPEAKER ROOM EQ CONFIG DISTANCE CROSSOVER SETUP RETURN TO MAIN MENU 2. Select the desired menu with the 3 or 4 cursor buttons, and press the ENTER button. Note • After you complete this the portion of the setup, press the 3, 4, 1, and 2 cursor button. The cursor will move to "RETURN TO SETUP MENU" and press the ENTER button to go to the Sub-menu. AUTO SETUP BEFORE STARTING THE SYSTEM PLEASE PLUG THE MIC. IN USING THE FRONT PANEL JACK **WARNING** THE TEST TONE IS LOUD >START RETURN TO MAIN MENU AUTO SETUP COMPLETED >APPLY CANCEL SPEAKER/R.EQ SETUP >AUTO SETUP SPEAKER CONFIG SPEAKER DISTANCE SPEAKER CROSSOVER ROOM EQ SETUP RRETURN TO MAIN MENU SETUP SPEAKER CONFIG >CENTER : SURROUND : SURR.B : SUBWOOFER: YES YES 2CH YES SPEAKER X-OVER >FRONT CENTER SURROUND SURR.B :FULL :70Hz :70Hz :70Hz RANGE RETURN TO SETUP MENU RETURN TO SETUP MENU SPEAKER DISTANCE >UNIT : METERS FRONT LEFT : 10.0ft CENTER : 10.0ft FRONT RIGHT: 10.0ft SURR RIGHT : 10.0ft SURR.B R : 10.0ft SURR.B L : 10.0ft SURR LEFT : 10.0ft SUBWOOFER : 10.0ft RETURN TO SETUP MENU ROOM EQ CONFIG >MODE : OFF RETURN TO MAIN MENU SETUP ADVANCED OPERATION TROUBLESHOOTING OTHERS 21