Marantz SR7001 User Manual - Page 13

ENGLISH (7) DISP. button Selects the display mode for the front display of the SR7001. (8) OSD button When this button is pressed, the current setting are displayed on the TV monitor. (9) SLEEP (sleep timer) button This button is used for setting the sleep timer. It can be operated the same way as the button in unit. (0) THX button Use this button to select the THX mode. ⁄2 MEMO button This button is used to store settings to memory or program a source. ⁄3 CONTROL button Thses buttons are used when operating the PLAY, STOP, PAUSE, and other commands of a source. Note: • This button is unavailable for the SR7001. ⁄4 SOURCE button Thses buttons are used to switch the source of your A/V Receiver / amplifer. Each time a source button is pressed, the remote control changes to the source which was pressed. This remote control can control 12 types of equipment. To change the A/V Receiver / amplifier source, press this button twice within two seconds. The signal is sent when it is pressed the second time. Note: • Select the AMP as the source to use this remote controll with the SR7001. • The MD button does not work with the SR7001. ⁄5 LIGHT 1 and 2 buttons Pressing these buttons will light up the LCD and its buttons. This lighting time can be set. If the lighting time is set to 0 seconds, the backlight turns on only while this button is pressed. The operations for LIGHT 1 and 2 are identical. ⁄7 MENU button (when AMP mode is selected) This button is used to call up the SETUP MAIN MENU of the SR7001. ⁄8 PREV (Previous) button This button is used to return to the previous channel on the television or other device. Note: • This button is unavailable for SR7001. ⁄9 CH (Channel) button This is used to change channels. ¤0 CURSOR buttons These buttons are used when controlling the cursor of the SR7001, DVD, or other AV equipment. ¤1 LCD Information about the sources and modes are shown on the LCD. LCD INDICATORS Information about currently selected source and direct code names are displayed on the LCD. A J LEARN I NAME B H MACRO G F E USE PAGE 1 2 3 4 C D A Source Name indicator This displays the name of the selected source, such as DVD, television, or other AV equipment (up to five characters). B Direct Button Name indicator This displays up to 20 types of button names for each source. (up to six characters) C Page indicator This displays the current page position. D Transmission indicator This lights up when the remote control is sending a signal. E USE indicator This is displayed under normal operation. F Battery Level indicator This is displayed when the battery level is low. I NAME indicator This is displayed when the remote control is in renaming mode. J LEARN indicator This is displayed when the remote control is in learning mode. ⁄6 CLEAR button This button is used to erase the memory or program of a source. G TIMER indicator This is displayed when the macro timer is set. H MACRO indicator This is displayed when the remote control is in macro programming mode. 10