Marantz SR7001 User Manual - Page 18

Hdmi Jack, Connecting Hdmi Devices - protect

Page 18 highlights

HDMI JACK This SR7001 has four HDMI inputs and one HDMI output (The SR8001 has two HDMI outputs.). It can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed. The SR7001 is also capable of converting analog video signals (Composite Video, S-Video, Component Video) for HDMI output. Select an input source from the OSD menu system. (See page 25, 36) Notes: • When the HDMI output is connected to a display monitor that does not support HDCP, signals are not output. To view images in HDMI, it is necessary to connect to a display that supports HDCP. • There may be no image output if connected to a TV or display that is not compatible with the above format. • Refer to the instruction manual of the TV or display to be connected to the SR7001 for detailed information regarding the HDMI terminal. * HDCP: High-bandwidth Digital Content Protection CONNECTING HDMI DEVICES An HDMI cable (sold separately) is used to connect the HDMI jack on the SR7001 with the HDMI jack on a DVD player, TV, projector or other component. To transmit multichannel audio via HDMI, the connected player must support multichannel audio transmission through its HDMI jack. HDMI video streaming is compatible with DVI in principle. Therefore, it is possible to connect to a TV or monitor that has a DVI terminal using an HDMI-DVI conversion cable or plug. When connecting to a DVI terminal, connect the audio signal separately. Notes: • Some HDMI components can be controlled over the HDMI cable, but this receiver cannot control other components this way. • When connected to a monitor (i.e., TV, projector, etc.) that does not support HDCP, video and audio are not output. • DVI cables come with 24-pin and 29-pin plugs. This receiver supports 24-pin DVI-D cables; 29-pin DVI cables cannot connect to it. • Some source devices such as DVD players or set top box do not support HDMI repeater operations like those of the SR7001. In such case, pictures are not properly projected on monitors such as TVs and projectors. • When multiple components are connected to this receiver, turn power to unused components off to prevent interference between them. • Disconnecting or connecting cables with the power on can damage the equipment. Turn the power off before disconnecting or connecting cables. • Some DVD-Audio disks disable downmixing. These types of disks are not played back correctly unless the left, center, right and surround left and right speakers, and subwoofer are connected. • If a DVD player that does not support HDMI 1.1 is connected to the SR7001, multi channel PCM playback is not possible even with DVD-Audio disks. • If an Super Audio CD player that does not support HDMI 1.2 is connected to the receiver, DSD playback is not possible even with Super Audio CD. (*DSD: Direct Stream Digital) • If a DVD player or other device with DVI output is connected to the SR7001, a separate audio cable (optical-digital, coaxial digital or analog) is needed for the audio signals. In this case, select the connected audio input as explained in "1-1 FUNC INPUT SETUP". (See page 25) • Multi channel PCM signals and audio signals of 62 kHz or higher that are input from the HDMI jack are not output from the DIGITAL OUT jacks. • Depending on the quiality of the cable used, the HDMI signal may be affected by noise. DVD player HDMI OUTPUT VIDEO PROJECTOR HDMI INPUT INPUT 1(TV) INPUT 2(DVD) OUT PUT 1 FM (75Ω) GND AM ANTENNA INPUT 1(TV) COMPONENT VIDEO Y CB/PB CR/PR INPUT 3(VCR1) INPUT 2(DVD) INPUT 3(VCR1) INPUT 4(DSS/VCR2) Y CB/PB CR/PR Y INPUT 4(DSS/VCR2) OUTPUT 1 OUTPUT 2 CB/PB CR/PR OUT PUT 2 HDMI Ver1.2 TV(1) DVD(2) VCR1(3) DSS/VCR2(4) MONITOR MULTI OUT OUT TV(1) DVD(2) VCR1(3) DSS/VCR2(4) MONI. OUT MODEL NO. SR8001 RS-232C XM AC IN SURROUND BACK L R L VIDEO IN DIGITAL IN 4 5 6 OUT IN DIGITAL OUT OUT RC-5 MULTI RC COAX. IN 1 2 3 TV L DVD VCR1 OPT. DSS/VCR2 OUT TAPE DC OUT IN OUT IN L 1 1 IR FLASHER RECEIVER IN IN 2 2 CD/CDR EMITTER OUT R MULTI OUT L OUT SL SR SL R IN OUT IN OUT IN OUT IN OUT A AUDIO B R SR (AUX2) S-VIDEO SBL C PRE OUT SBR SBL SW C 7.1CH IN SBR SW R MULTI SPEAKER /SPEAKER C SUB SPEAKER ON OFF UNSWITCHED 1.25A 150W MAX SWITCHED 1.25A 150W MAX AC OUTLETS 120V 60Hz SPEAKER SYSTEMS L R FRONT A L FRONT B R CEN TER L SURR. R FRONT A OR B.CENTER.SURR. SURR BACK : MINIMUM 6 OHMS FRONT A + B : MINIMUM 8 OHMS SATELLITE TUNER HDMI OUTPUT 15 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79

ENGLISH
15
HDMI JACK
This SR7001 has four HDMI inputs and one HDMI
output (The SR8001 has two HDMI outputs.). It can
send digital video and audio signals from DVDs and
other sources directly to a display. It minimizes signal
degradation caused by analog conversion so that high
quality images can be enjoyed.
The SR7001 is also capable of converting analog
video signals (Composite Video, S-Video, Component
Video) for HDMI output.
Select an input source from the OSD menu system.
(See page 25, 36)
Notes:
• When the HDMI output is connected to a display
monitor that does not support HDCP, signals are not
output. To view images in HDMI, it is necessary to
connect to a display that supports HDCP.
• There may be no image output if connected to a
TV or display that is not compatible with the above
format.
• Refer to the instruction manual of the TV or display to
be connected to the SR7001 for detailed information
regarding the HDMI terminal.
* HDCP: High-bandwidth Digital Content Protection
CONNECTING HDMI DEVICES
An HDMI cable (sold separately) is used to connect the
HDMI jack on the SR7001 with the HDMI jack on a DVD
player, TV, projector or other component. To transmit
multichannel audio via HDMI, the connected player
must support multichannel audio transmission through
its HDMI jack.
HDMI video streaming is compatible with DVI in
principle. Therefore, it is possible to connect to a TV
or monitor that has a DVI terminal using an HDMI-DVI
conversion cable or plug. When connecting to a DVI
terminal, connect the audio signal separately.
Notes:
• Some HDMI components can be controlled over the
HDMI cable, but this receiver cannot control other
components this way.
• When connected to a monitor (i.e., TV, projector,
etc.) that does not support HDCP, video and audio
are not output.
• DVI cables come with 24-pin and 29-pin plugs. This
receiver supports 24-pin DVI-D cables; 29-pin DVI
cables cannot connect to it.
• Some source devices such as DVD players or set
top box do not support HDMI repeater operations
like those of the SR7001. In such case, pictures are
not properly projected on monitors such as TVs and
projectors.
DVD player
VIDEO PROJECTOR
• When multiple components are connected to this
receiver, turn power to unused components off to
prevent interference between them.
• Disconnecting or connecting cables with the power
on can damage the equipment. Turn the power off
before disconnecting or connecting cables.
• Some DVD-Audio disks disable downmixing.
These types of disks are not played back correctly
unless the left, center, right and surround left and
right speakers, and subwoofer are connected.
• If a DVD player that does not support HDMI 1.1
is connected to the SR7001, multi channel PCM
playback is not possible even with DVD-Audio
disks.
• If an Super Audio CD player that does not support
HDMI 1.2 is connected to the receiver, DSD
playback is not possible even with Super Audio
CD.
(*DSD: Direct Stream Digital)
• If a DVD player or other device with DVI output
is connected to the SR7001, a separate audio
cable (optical-digital, coaxial digital or analog) is
needed for the audio signals. In this case, select the
connected audio input as explained in “
1-1 FUNC
INPUT SETUP
”. (See page 25)
• Multi channel PCM signals and audio signals of 62
kHz or higher that are input from the HDMI jack are
not output from the DIGITAL OUT jacks.
• Depending on the quiality of the cable used, the
HDMI signal may be affected by noise.
COMPONENT
VIDEO
IN
OUT
S-VIDEO
IN
OUT
SL
L
R
SR
FLASHER
IN
IR
RECEIVER
IN
SPEAKER
SYSTEMS
OUT
6
COAX.
3
5
4
2
1
SURROUND
BACK
R
L
TAPE
CD/CDR
ON
OFF
IN
R
L
DSS/VCR2
AUDIO
TV
IN
OPT.
IN
OUT
IN
OUT
IN
SR
VCR1
IN
IN
DVD
SL
C
B
/
P
B
C
R
/
P
R
C
R
/
P
R
C
R
/
P
R
C
B
/
P
B
C
B
/
P
B
Y
Y
Y
SBR
SBL
SBR
SBL
C
SW
SW
C
R
L
R
L
R
R
R
L
L
L
1
2
EMITTER
OUT
UNSWITCHED
1.25A 150W MAX
AC OUTLETS
120V 60Hz
SWITCHED
1.25A 150W MAX
VIDEO
FM
(75
)
GND
AM
ANTENNA
OUT
PUT
1
OUT
PUT
2
INPUT 3(VCR1)
INPUT 1(TV)
INPUT 1(TV)
INPUT 4(DSS/VCR2)
INPUT 3(VCR1)
INPUT 4(DSS/VCR2)
INPUT 2(DVD)
HDMI
Ver1.2
INPUT 2(DVD)
DC OUT
PRE
OUT
DIGITAL IN
RC-5
MULTI RC
7.1CH
IN
MONITOR
OUT
DVD(2)
DSS/VCR2(4)
TV(1)
MULTI
OUT
VCR1(3)
DVD(2)
DSS/VCR2(4)
VCR1(3)
TV(1)
MONI. OUT
(AUX2)
XM
RS-232C
MULTI SPEAKER
/SPEAKER C
SUB SPEAKER
FRONT A OR B.CENTER.SURR.
SURR BACK : MINIMUM 6 OHMS
FRONT A + B : MINIMUM 8 OHMS
FRONT
B
SURR.
CEN
TER
FRONT
A
MODEL NO. SR8001
AC IN
XM
INPUT 4
INPUT 4
(
DSS/VCR2
DSS/VCR2
)
INPUT 2
INPUT 2
(
DVD
DVD
)
HDMI
HDMI
Ver1.2
Ver1.2
HDMI OUTPUT
HDMI INPUT
HDMI OUTPUT
SATELLITE TUNER