Maytag MDB9601AWB Use and Care Guide - Page 9
Cycles, Options, andLights
View all Maytag MDB9601AWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CyclesO, ptionasndLights Cycle Options In addition to choosing a cycle from page 7, choose as many available options as are needed for your dishload. Hi Temp Wash (select models) TonghScrubZ"/ ToughScrub z"PlUS (select models) Sanitize (select models) Extra Rinse (select models) 160 ° Wash (select models) Hi Temp Wash provides additional heat during the wash portion of the cycle, which ensures proper water temperature for better cleaning and drying results. It also adds an additional rinse to the cycle which improves results in hard water situations. Selected when washing loads with hard-to-remove food soils. Depending on which cycle is being used, this option adds heat and/or wash time to the wash cycle. Sanitizes dishware. When cycle monitor recognizes that the proper conditions have been met, SANITIZED light will activate at the end of the cycle. Sanitization may not be achieved if there is an interruption of the cycle, power failure or if the incoming water temperature is below 120 ° F (49 ° C). Adds an additional rinse to cycle. An extra rinse helps to improve results in hard water situations. Raises temperature in the final rinse to 160 ° E This option can be used with any cycle except Quick Wash or Insta Wash (select models) and Rinse Only. All cycles (except Rinse Only [select models]) Heavy Wash Normal Wash Light Wash Auto Clean Heavy Wash* Normal Wash* Light Wash* Auto Clean* All cycles (except Rinse Only) Heavy Wash Normal Wash Auto Clean Heated Dry For enhanced drying results select this option. When Heated Dry is not selected, towel drying of some items such as plastic and items with non-stick surfaces may be necessary and more moisture may be noticed adhering to the dishwasher interior. In models with plastic interiors, it is normal to notice vapor escaping from the door vent as the heat dries your dishes. Vapor will escape even if Heated Dry is not selected. All cycles (except Rinse Only) * Only these cycles have been designated to meet NSF requirements (NSF/ANSI 184 Residential Dishwasher) for sanitization. Options Start/Cancel Delay Control Lock Option (select models) Starts and stops dishwasher. See page 2 under Operating Tips: Operating the Dishwasher, for explanation. Used to automatically start the cycle at a later time. See page 9 for instructions. Locks control touchpad to prevent unwanted use. See page 9 for instructions. All Cycles All Cycles All Cycles Cont.