Maytag MEDB800VQ Use and Care Guide - Page 20
inthecrease
UPC - 883049140506
View all Maytag MEDB800VQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chectkhelevelneosfsthedryebr yfirstplacinagleveol nthetopofthedryenr eatrhe console. 3, Ioosen the top screw from each of the 2 hinges in Step 2. -A B *A Thenb,yplacinagleveilnthecreasoenthesideofthedryebr etweethnetopofthedryear nd "B thedryecr abinect,hectkhelevelnefsrsomfronto back. If the dryer is not level, prop up the dryer using a wood block. Use a wrench to adjust the legs up or down and check again for levelness. A. Loosen these screws. t:3. Remove these screws. 4. Remove the dryer door and the hinges by lifting upward on the door. I.ay the door on a flat, protected surface, with the inside of the door facing up. Remove remaining 2 loose screws from dryer front panel. 5. Remove the 4 plastic plugs located outside the dryer door opening. location of plastic plugs shown You can change your door swing from a right-side opening to a left-side opening, if desired. 1. Place a towel or soft cloth on top of the dryer or work space to protect the surface. Remove the door assembly 1. Open the dryer door. 2. Remove the bottom screw from each of the 2 hinges that attach the dryer door to the front panel of the dryer. 6, Install 4 plastic plugs into screw holes in the dryer left where the hinges were removed in Step 4. 20