Maytag MEDB800VQ Use and Care Guide - Page 8

Grounding, Instructions

Get Maytag MEDB800VQ - MaytagR BravosR Steam Electric Dryer PDF manuals and user guides
UPC - 883049140506
View all Maytag MEDB800VQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Electrical Shock Hazard Plug into a grounded 4 prong ouUet. Failure to do so can result in death or electrical shock. It is your responsibility • To contact a qualified electrical installer. To be sure that the electrical connection is adequate and in conformance with the Canadian Electrical Code, C22.1 -latest edition and a[[ local codes. A copy of the above codes standard may be obtained from: Canadian Standards Association, 178 Rexda[e Blvd., Toronto, ON M9W 1 R3 CANADA. To supply the required 4 wire, single phase, 120/240 volt, 60 Hz., AC only electrical supply on a separate 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. Connect to an individual branch circuit. This dryer is equipped with a CSA International Certified Power Cord intended to be plugged into a standard 14-30R wail receptacle. The cord is 5 ft (1.52 m) in length. Be sure wail receptacle is within reach of dryer's final location. If you are using a replacement power supply cord, it is recommended that you use Power Supply Cord Replacement Part Number 3394208. For further information, please reference the service numbers located in the "Assistance or Service" section. GROUNDING iNSTRUCTiONS [] For a grounded, cord-connected dryer: This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This dryer is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING-" Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug provided with the dryer: if it will not fit the outlet, have a proper outlet installed by a qualified electrician. SAVE THESE iNSTRUCTIONS 4-wire receptacle 14-30R • Do not use an extension cord. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Electrical
Shock
Hazard
Plug into
a
grounded
4 prong
ouUet.
Failure
to
do
so
can result in death
or
electrical
shock.
It is your responsibility
•
To contact a qualified
electrical
installer.
To be sure that
the
electrical
connection
is adequate
and
in conformance
with
the
Canadian
Electrical
Code,
C22.1
-latest
edition
and
a[[ local
codes.
A copy
of the
above
codes
standard
may
be obtained
from:
Canadian
Standards
Association,
178
Rexda[e
Blvd.,
Toronto,
ON
M9W
1 R3 CANADA.
To supply
the
required
4 wire,
single
phase,
120/240
volt,
60
Hz.,
AC only
electrical
supply
on
a separate
30-amp
circuit,
fused
on
both
sides of the
line.
A time-delay
fuse or
circuit
breaker
is recommended.
Connect
to an
individual
branch
circuit.
This
dryer
is equipped
with
a CSA International
Certified
Power
Cord
intended
to be
plugged
into
a standard
14-30R
wail
receptacle.
The cord
is 5 ft (1.52
m) in length.
Be
sure wail
receptacle
is within
reach
of
dryer's
final
location.
If you
are using
a replacement
power
supply
cord,
it is recommended
that
you
use Power
Supply
Cord
Replacement
Part Number
3394208.
For further
information,
please
reference
the
service
numbers
located
in the
"Assistance
or Service"
section.
GROUNDING
iNSTRUCTiONS
[] For a grounded,
cord-connected
dryer:
This dryer must be grounded.
In the event of malfunction
or
breakdown,
grounding
will reduce the risk of electric shock
by providing
a path of least resistance
for electric current.
This dryer
is equipped
with a cord having an
equipment-grounding
conductor
and a grounding
plug. The
plug must be plugged
into an appropriate
outlet that is
properly
installed and grounded
in accordance
with
all local
codes and ordinances.
WARNING-"
Improper
connection
of the
equipment-grounding
conductor
can result in a risk of
electric shock.
Check with a qualified
electrician
or service
representative
or personnel
if you are in doubt
as to
whether
the dryer is properly
grounded.
Do not modify the
plug provided
with the dryer: if it will not fit the outlet,
have
a proper outlet
installed
by a qualified
electrician.
SAVE
THESE
iNSTRUCTIONS
4-wire receptacle
14-30R
•
Do
not
use an extension
cord.
8