Maytag MGD6400TB Use and Care Guide - Page 18
Status, Lights
View all Maytag MGD6400TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Cycle tips • Dry most loads using the preset cycle settings. • Refer to the Sensor Dry or Timed Preset Cycle Settings chart (in the "Cycles" section) for a guide to drying various loads. • Drying temperature and dryness level are preset when you choose a Sensor Dry Cycle. You can select a different dryness level, depending on your load, by pressing Dryness and choosing More, Normal, less or Damp. NOTE: You cannot use the Timed Cycle Adjust and you cannot choose a Temperature with the Sensor Dry Cycles. • If you wish to adjust the cycle length of a Timed Cycle, press the Timed Cycle Adjust up or down arrows. Adjust the temperature of a Timed Cycle by pressing |emp until the desired temperature is selected. NOTE: You cannot choose a dryness level with Timed Cycles. STATUS LIGHTS Follow the progress of your dryer with the drying Status indicator lights. Wrinkle Prevent Setting The Wrinkle Prevent setting light illuminates on during the Wrinkle Prevent setting. when this option is selected. This indicator stays Indicator lights Other indicator lights show Cycle, Modifiers, Options display shows the estimated or actual time remaining. and Cycle Signal settings selected. The CYCLES Select the drying cycle that matches the type of load you are drying. See Sensor Dry or Timed Preset Cycle Settings charts. SENSOR DRY TIM_D SENSING WET ,,o • COOL DAMP DOWN •• WRINKLE DRY PREVENT • Oj Sensing • In a Sensor Dry Cycle, the Sensing light illuminates until a wet item is detected. • In a Timed Cycle, the Sensing light illuminates at the beginning of a cycle and turns off 5 minutes into the cycle. Wet The Wet light illuminates at the beginning of a Sensor Dry Cycle if a wet item is detected. • in a Sensor Dry Cycle, if a wet item is not detected after approximately 5 minutes, the dryer goes directly into Cool Down. The Cool Down and the Wrinkle Prevent setting indicators will illuminate, if selected. • In a Timed Cycle, wet items are not detected. [he dryer will continue to run for the length of time selected, and the Wet light will illuminate. ]he damp light will not illuminate. Damp The Damp dry. Damp light illuminates in a Sensor Dry Cycle when the laundry Dry Chime beeps, if selected. See "Options." is approximately 80% Cool Down The Cool Down light illuminates ease in handling. during the cool down part of the cycle. [aundry cools for Dry The Dry light illuminates Wrinkle Prevent setting. when the drying cycle is finished. This indicator stays on during the DRY CYCLES Sensor Dry Cycles Sensor Dry Cycles allow you to match the cycle to the load you are drying. See the following Sensor Dry Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying. Heavy Duty Use this cycle to get high heat for heavyweight mixed loads, cottons and jeans. Normal Use this cycle to get medium heat for drying sturdy fabrics such as work clothes and sheets. Wrinkle Control Use this cycle to get low heat for drying no-iron fabrics, such as sport shirts, casual business clothes and permanent press blends. Delicate Use this cycle to get extra-low knit fabrics. heat to gently dry items such as lingerie, blouses or washable 18