Maytag MGD6400TB Use and Care Guide - Page 23
Cleaning, Dryer, Interior, Removing, Accumulated, Vacation, Moving, Changing, Light
View all Maytag MGD6400TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
CLEANING THE DRYER INTERIOR 1. Apply a liquid, nonflammable household cleaner to the stained area of the drum and rub with a soft cloth until stain is removed. 2. Wipe drum thoroughly with a damp cloth. 3. Tumble a load of clean cloths or towels to dry the drum. NOTE: Carments that contain unstable dyes, such as denim blue jeans or brightly colored cotton items, may discolor the dryer interior. These stains are not harmful to your dryer and will not stain future loads of clothes. Dry unstable dye items inside-out to avoid dye transfer. REMOVING ACCUMULATED LINT From Inside the Dryer Cabinet lint shouM be removed every 2 years, or more often, depending on dryer usage. (_leaning should be done by a qualified person. From the Exhaust Vent lint shouM be removed every 2 years, or more often, depending on dryer usage. VACATION AND MOVING CARE Vacation care Operate your dryer only when you are at home. If you will be on w_cation or not using your dryer for an extended period of time, you should: 1. Unplug dryer or disconnect power. 2. Close shutoff valve in gas supply line. 3. Clean lint screen. See "Cleaning the I.int Screen." Moving care 1. Unplug the power supply cord. 2. Close shutoff valve in gas supply line. 3. Disconnect gas supply line pipe and remove fittings attached to dryer pipe. 4. Cap the open fuel supply line. 5. Make sure leveling legs are secure in dryer base. 6. Use masking tape to secure dryer door. CHANGING THE DRUM LIGHT The dryer light automatically turns on inside the dryer drum when you open the doon I To change the drum light 1. Unplug dryer or disconnect power. 2. Open the dryer door. locate the light bulb cover on the back wall of the dryer. Remove the screw located in the lower right corner of the coven Remove the cover. 3. Turn bulb counterclockwise. Replace the bulb with a 1O-watt appliance bulb only. Replace the cover and secure with the screw. 4. Plug in dryer or reconnect power.