Motorola DS6708-DL20291ZZR Reference Guide - Page 141

Keyboard Wedge Interface 10 - 3 1. Turn off the host and unplug the keyboard connector. 2. Attach the modular connector of the Y-cable to the cable interface port on the digital scanner. See Installing the Interface Cable on page 1-3. 3. Connect the round male DIN host connector of the Y-cable to the keyboard port on the host device. 4. Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector. 5. If needed, attach the optional power supply to the connector in the middle of the Y-cable. 6. Ensure that all connections are secure. 7. Turn on the host system. 8. Select the Keyboard Wedge host type by scanning the appropriate bar code from Keyboard Wedge Host Types on page 10-5. 9. To modify any other parameter options, scan the appropriate bar codes in this chapter. Keyboard Wedge Parameter Defaults Table 10-1 lists the defaults for Keyboard Wedge host parameters. To change any option, scan the appropriate bar code(s) in the Keyboard Wedge Host Parameters section beginning on page 10-5. NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and miscellaneous default parameters. Table 10-1 Keyboard Wedge Host Default Table Parameter Default Keyboard Wedge Host Parameters Keyboard Wedge Host Type IBM PC/AT& IBM PC Compatibles Country Types (Country Codes) North American Ignore Unknown Characters Transmit Keystroke Delay No Delay Intra-Keystroke Delay Disable Alternate Numeric Keypad Emulation Disable Caps Lock On Disable Caps Lock Override Disable Convert Wedge Data No Convert Page Number 10-5 10-6 10-8 10-8 10-9 10-9 10-10 10-10 10-11