Motorola DS6708-DL20291ZZR Reference Guide - Page 23
Setting Up the Digital Scanner, Standard Model - cable
View all Motorola DS6708-DL20291ZZR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Getting Started 1 - 3 Setting Up the Digital Scanner Standard Model Installing the Interface Cable 1. Plug the interface cable modular connector into the cable interface port on the bottom of the scanner handle (see Figure 1-3). 2. Gently tug the cable to ensure the connector is secure. 3. Connect the other end of the interface cable to the host (see the specific host chapter for information on host connections). Clip Cable interface port To host Figure 1-3 Installing the Cable Interface cable modular connector NOTE Different hosts require different cables. The connectors illustrated in each host chapter are examples only. Connectors vary from those illustrated, but the steps to connect the digital scanner are the same. Removing the Interface Cable 1. Using the tip of a screwdriver, depress the cable's modular connector clip. Figure 1-4 Removing the Cable 2. Carefully slide out the cable. 3. Follow the steps for Installing the Interface Cable to connect a new cable.