Motorola DS6708-DL20291ZZR Reference Guide - Page 70

5 - 2 Symbol DS6708 Digital Scanner Product Reference Guide Scanning Sequence Examples In most cases scanning one bar code sets the parameter value. For example, to disable the decode aiming pattern, scan the Disable Decode Aiming Pattern bar code listed under Decode Aiming Pattern on page 5-5. The digital scanner issues a fast warble beep and the LED turns green, signifying a successful parameter entry. Other parameters require scanning several bar codes. See these parameter descriptions for this procedure. Errors While Scanning Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter. Decoding Preferences Parameter Defaults Table 5-1 lists the defaults for decoding preferences parameters. There are two ways to change the default values: • Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the default parameter values, scan the Set Default Parameter on page 4-4. • Configure the digital scanner using the 123Scan configuration program (see Chapter 12, 123Scan). NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and miscellaneous default parameters. Table 5-1 Decoding Preferences Parameter Defaults Parameter Parameter Number Decoding Options Decoding Illumination F0h 2Ah Illumination Bank Control F1h 3Bh Decode Aiming Pattern F0h 32h Low Light Enhancement F1h 64h Presentation Mode Field of View F1h 61h Default Enable Full Illumination Enable Disable Default (Reduced) Page Number 5-3 5-4 5-5 5-5 5-6