Motorola DS6708-DL20291ZZR Reference Guide - Page 69
Decoding Preferences, Introduction - programming scanner
View all Motorola DS6708-DL20291ZZR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 5 Decoding Preferences Introduction You can program the digital scanner to perform various functions, or activate different features. This chapter describes decoding preference features and provides programming bar codes for selecting these features. The digital scanner ships with the settings shown in the Decoding Preferences Parameter Defaults on page 5-2 (also see Appendix A, Standard Default Parameters for all host device and miscellaneous defaults). If the default values suit requirements, programming is not necessary. To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile memory and are preserved even when the digital scanner is powered down. NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the screen, be sure to set the document magnification to a level where you can see the bar code clearly, and bars and/or spaces are not merging. If not using a USB cable, select a host type (see each host chapter for specific host information) after the power-up beeps sound. This is only necessary upon the first power-up when connected to a new host. To return all features to default values, scan the Set Default Parameter on page 4-4. Throughout the programming bar code menus, asterisks (*) indicate default values. * Indicates Default *Enable Decode Aiming Pattern (02h) Feature/Option