Motorola DS6708-DL20291ZZR Reference Guide - Page 34
Scanning in Presentation Mode, Scanning with the Digital Scanner in the Intellistand
View all Motorola DS6708-DL20291ZZR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2 - 6 Symbol DS6708 Digital Scanner Product Reference Guide Scanning in Presentation Mode Scanning with the Digital Scanner in the Intellistand The optional Intellistand adds greater flexibility to scanning operation. When you place the digital scanner in the stand's "cup," the digital scanner's built-in sensor places the digital scanner in presentation mode. When you remove the digital scanner from the stand it operates in its normal hand-held mode. Scanner Holder (Cup) Angle Adjustment Knob Height Adjustment Knob Figure 2-14 Inserting the Digital Scanner in the Intellistand To operate the digital scanner in the IntelliStand: 1. Connect the digital scanner to the host (see the appropriate host chapter for information on host connections). 2. Insert the digital scanner in the Intellistand by placing the front of the digital scanner into the stand's "cup" (see Figure 2-14). 3. Use the Intellistand's adjustment knobs to adjust the height and angle of the digital scanner. 4. Center the symbol in the aiming pattern. The entire symbol must be within the brackets. 5. Upon successful decode, the digital scanner beeps and the LED turns green. For more information on beeper and LED definitions, see Table 2-1 and Table 2-2.