Motorola DS6708-DL20291ZZR Reference Guide - Page 73

Decoding Preferences 5 - 5 Decode Aiming Pattern Parameter # F0h, 32h This parameter only applies in Decode Mode. Select Enable Decode Aiming Pattern to project the aiming pattern during bar code capture, or Disable Decode Aiming Pattern to turn the aiming pattern off. NOTE With Picklist Mode on page 4-10 enabled, the decode aiming pattern flashes even when the Decode Aiming Pattern is disabled. *Enable Decode Aiming Pattern (02h) Disable Decode Aiming Pattern (00h) Low Light Enhancement Parameter # F1h, 64h In Scanstand mode, selecting Enable Low Light Enhancement causes illumination to remain on at a low level in low lighting conditions. Select Disable Low Light Enhancement to prevent illumination from remaining on under these conditions. Enable Low Light Enhancement (01h) *Disable Low Light Enhancement (00h)